testuser7

Is there any plan to add the remote state feature?

Any progress on this?

You should add to the instructions that before running mtd with the `-r` option you should change the partition first: `fw_setenv boot_part 1` or `fw_setenv boot_part 2` depending on the...

@mrnuke Can you try BDF with updated regdb: https://github.com/testuser7/firmware_qca-wireless/blob/9699b7c455e8efd6493c8b8f5f88580603aec825/board-tplink_eap610-outdoor.ipq6018 ?

> @testuser7, that's amazing! How was the BDF was modified? So I will add a PR with a modified BDF file. Regdb was extracted from upstream BDF and replaced (IPQ6018...

> @testuser7, I meant what tools did you use to modify the BDF itself. > > If I try to use `ath11k-dbencoder`, it will append the regdb section to the...

> AFAIK loading external regdb is only working if the bdf does not contain an embedded regdb. In theory it should be possible to add a boolean value to the...

> Do you known how to remove the embedded regdb from the bdf? Which variant are you interested in? I can try to do that.

> Netgear WAX214 [board-wax214.zip](https://github.com/openwrt/openwrt/files/14748844/board-wax214.zip) I have no idea if it will work.

@mrnuke https://github.com/testuser7/ath_bdf_tool