Jan-Ole Schümann

Hi, It sounds like your ESP was stuck in a reboot-loop. I can only guess from here, since it's working for me, Keypad is enabled on my ESP and it'...

What is set as "Query interval keypad" in your ESP?

Try to call the config portal with "?KPENA=0". If that doesn't get through, factory reset I guess. Very strange though, not sure how to investigate the issue. Maybe I'll try...

Please keep in mind that home assistant isn't the only home automation system. For other systems it's more convenient to expose single states, however it's easily doable to just do...

Having a quick look at the Bridge API, I'd say it's possible but would require a substantial amount of work. Not only writing the code, but also testing with existing...

I'd say there's enough left ################## Size Summary ################## Program Size: 1545758 of 1966080 bytes (78%) Data Size: 50260 of 327680 bytes (15%) ################################################## A big part of what's used...

I tested it, it worked so far. It changed from unlocked to unlockedLnga to locked. How did you trigger the lock'n'go?

ok I'll check it when I have time

Can you try setting the energy-saving mode to fast? Explanation: To notify a state change, the lock sends iBeacons. When setting it to fast, beacons are sent in shorter intervals,...

I could reproduce the behavior. It's strange though it seems the lock signals the state change after it returns to the locked position, not for the execution of lock'n'go. It's...