TechnoPhreak

I could not sign-off anyway because there is no details about how this was tested.

I have the same issue with 1.10.11, I will try with 1.10.9 and 1.10.10 and report back with findings.

I am using Debian 12. I have not noticed any issue with 200 OK. I will take a closer look and report if I find anything on that regard.

@bferreirq Yeah, in my case those stale calls are not even properly killed with uuid_kill, there are remnants. I suspect it is not directly related, perhaps your OK issue is...

@bferreirq The issue I have is that those have remants (still appears in `show calls`) after they get killed and I only restart when there are no more calls in...

@greenbea Thanks for that info. Have you found a way to know (via uuid_dump for example) if they are still really connected ?

In my specific scenario, the issue only occurred when transcoding inbound calls. It does not mean it only affects inbound calls, it's just that with my current configuration only inbound...

@bferreirq The calls that seems to trigger most often this issue are as follow: * [A LEG] Call comes in sip_profile (operator) with G729,PCMU as codec offered Porifile set to...

I can confirm I am also getting stale/stuck calls with v1.10.10 As far as I am concenred, here is my diagnostic: * v1.10.8 : Not affected * v1.10.9 : Not...