teachingtechYT.github.io
teachingtechYT.github.io copied to clipboard
teachingtechYT
A lot of your videos that explain things, such as connecting to the printer through a terminal, are heavily geared towards the Windows users. It makes it more difficult for...
I just finished my 400x400 Ender Extender upgrade for the V2, I'm having difficulties updating the software for the 3d printer to recognize its new parameters, This is my first...
Under Slicer Flow Calibration, the last line : For example, using M221 S90 would tell the firmware to only extrude 90% of what the gcode asks for. This is an...
Could you please clarify on the website what to do with the number once you have it. If it's a Marlin adjustment or a slicer adjustment. I personally use Cura...
I like the First Layer Generator, but I would suggest to move Z up when the head travelling between the single squares to avoid scratches on the bed. Especially when...
Is there a way the hotend can heat up while further of the bed? Unless I manualy edit the Gcode, my nozzle heats u in the home position. Bad for...
I have bltouch on my printer and when I enable Power Loss Recovery, as soon as it switches to printing, I get this error: reset the printer and start printing....
The page teachingtechyt.github.io/calibration.html#accel has a Paypal link that directs you to a non-existent page
I was finally trying the calibration tool but I got issues with the GCODE generation. The problem came from the M82, E absolute mode used by Simplify 3D. In my...
This allows to fine tune fan speed for the purpose of strength and to prevent overheating. Example usage pattern: - tune ASA via temperature tower to find the best temperature...
