Zee

> `rm /etc/wireguard/wg0.conf` would this cause conflict among peers? say a peer has 10.9.0.4 and wg0.conf gets removed, adding new client also gets 10.9.0.4

> @westz36 It deletes the main config so yes, you will have to setup your peers again. is there a way to fix this without deleting the main config? thanks!

Ended up resolving the issue with ``` Ethtool -k tso off Hope this help others in the future

> ie tso off, firewall offload on ? I didnt have firewall enabled. TSO was causing the problem for me

> @tczee36 For how long a continuous uptime have you had TSO disabled and not seen the error? > > This was certainly disabled in the [past](https://github.com/openwrt/openwrt/issues/8660) with [commit](https://git.openwrt.org/?p=openwrt/openwrt.git;a=commitdiff;h=f8b849103dfe1b21a6462837efc9460ca3cca02d) for...

My router have been rock solid since my last comment. Uptime 20 days.

> The bug appears when the video or other stream starts from the devices connected by wires. It turns off wired devices and WAN connection, WLAN connection stay alive. All...

is this fixed? i'm having the exact issue at v0.12.3