taoloo897
taoloo897
Hi. I had 2 libraries one with kwp2000 and other with 9141-2 , both works very slow and intrerrupt my lcd display data. Both use 5-baud. I tried readKWP ,...
Thanks for your time. Must this library work with mc33290 too , right? I comment the line 386 and nothing happen 15:43:21.733 -> initialization 15:43:21.734 -> 15:43:23.733 -> Before magic...
Hi again. this is what one of library had on serial/debug ``` 07:40:39.979 -> Starting Init 07:40:42.044 -> SYNC Byte: 55 07:40:42.044 -> KEY1: 8 KEY2: 8 07:40:42.076 -> Sending...
Hi and excuse my late answer. I'm not at home and i can verify only after one week because i'm in hollyday. My esp32 is a wroomer 32 u with...
Hi. I arrived at home and i tested the new version of your library. Doesnt't work the same error: 16:30:05.200 -> initialization 16:30:05.200 -> 16:30:05.559 -> Before magic 5 baud....
YES, enter in that ESP_ARDUINO_VERSION_MAJOR
Yes it is exactly the same. If i upliad thst library over yours in my esp32 it works.. I will try with an arduino megs these days , first with...
HI again. I made teste and tests..... reader_esp32 not work, i receive first byte every time 0. I tried readerKWPSlow because i have like (1941) other file witch works. I...
it is setted to false, not enter in that check, after that check is a problem, if i put a debug (print) funtion ....the program stopped
It is not from the sketch, it is something inside the library.. If you see first post from yesterday, something is strange. These OBD9141println("") added in OBD9141.begin and OBD9141.set_port add...