tantive

Tibber will also move to 15 minute slots [https://tibber.com/de/magazine/inside-tibber/viertelstuendliche-strompreise](https://tibber.com/de/magazine/inside-tibber/viertelstuendliche-strompreise)

Not sure if I undstand/like that idea. Supported solar forecast suppliers like open-meteo are very good in estimating power - even in 15-min intervals. By using a more coarse grained...

Understood, thanks for the clarification. Ping me if i can contribute in switching open-meteo support to 15-minute intervals and/or energy during time window.

@harmendp Thanks for pointing out the missing division by 10.

@harmendp Can you explain why you removed the default usage of 5627 # BDC rated power in charge mode when maxchargepower is not set? https://github.com/evcc-io/evcc/blob/a72f0c3c5ff91be0aa724c9bef96bbec6f271820/templates/definition/meter/sungrow-hybrid.yaml It might be an idea...

@andig Sure, reading registers and using those values as default might help. The intent of my last PR was that the user specifies the default values he wants to use...

> > @harmendp Can you explain why you removed the default usage of 5627 # BDC rated power in charge mode when maxchargepower is not set? https://github.com/evcc-io/evcc/blob/a72f0c3c5ff91be0aa724c9bef96bbec6f271820/templates/definition/meter/sungrow-hybrid.yaml > > It...

> What do you think of using current behavior if maxdischargepower is not set > > So if maxdischargepower 0 then use maxdischargepower else maxdischargepower reg == maxchargepower reg This...