szaman-89
szaman-89
> Hello @Koenkk , > I followed the tutorial but its not complete. I made a zigbee sniffer, connected the device with its hub and sniffed the data: > i...
> Hi @MUzair030 and @szaman-89 , I am trying too to sniff the traffic of this device but I cannot get any packet, perhaps you could provide some help? >...
> what do you mean by "it"? the device or the sniffer? I tried several times to sniff the traffic (both with the Rpi and with Windows), and then re-pair...
> One question: if you use linux, do you see a device in /dev associated to the sniffer? Because I don't, and I don't know if it's a problem... I...
> OK , and what channels you are using, as a curiosity? Mine gateway works on channel 20.
> @szaman-89 thank you for your help, I tried a lot of channels and finally discovered my device is using channel 15 so I was able to capture both pairing...
You can find it here: https://www.zigbee2mqtt.io/guide/configuration/device-availability.html
> I have a Sonoff Dongle-E with router firmware that went offline and crashed half of my network last weekend. It is in use since about two years and never...
I have exact same problem with all my routers. I'm loosing my heart for using zigbee network. After each power outage I have crash of whole network and this time...
> > I have exact same problem with all my routers. I'm loosing my heart for using zigbee network. After each power outage I have crash of whole network and...