systematiccaos
systematiccaos
Same problem here: OS: Arch Linux x86_64 Host: 20TL000KFR ThinkPad X1 Extreme Gen 3 Kernel: 5.16.1-arch1-1 Uptime: 2 hours, 12 mins Packages: 1101 (pacman), 15 (flatpak) Shell: fish 3.3.1 Resolution:...
Added another commit to support frame-skipping for the mask calculation. No argument will update the mask every 5 frames.
Oh wow, thank you for this very fast answer! Actually building and flashing worked, but it is stuck on calibration (not yet sure if it is because of not detecting...
Actually it is not starting calibration, so it is stuck on the beginning.
Thanks - does not work either. Still the same - I start the unit and it gets stuck on "Connect the probe to ground and press ok". Maybe there's something...
BTW - where can I get you a coffee? ;-)
The message is: "Connect the probe to ground and press ok". I pressed the correct button. :-) Already also tried the otherones.
I have a STLink v2 attached to it via SWD, so that would be theoretically possible. What kind of backtracking do you need? I am currently not able to step...
Thanks for your help! I just did the steps and it does not seem to crash. So maybe the issue is really related to the button-inputs or sth. Reading symbols...
You are right indeed, it appears to be a CH32F103 after looking closer to the hardware. They seem to have even remarked the chip on the hardware, but so badly...