Shell M. Shrader
Shell M. Shrader
> hi. wow, you are fast! yeah, I noticed that. Not much to see in the terminal (see attached). > >  > Do you mind sharing what machine it...
Ah... Grbl v.9 Status reporting is disabled. Take a look at $10 ... You'll want to set it to 3. $10=3 Report back results.
Grbl v.9 documentation is here:. https://github.com/grbl/grbl/wiki/Configuring-Grbl-v0.9#grbl-settings
I see the signature line is blank so the plugin is unable to determine which version of grbl compliance it is supposed to use. Have you tried doing a connect/disconnect...
See the output of $I for more context here.
You should also see if there is a newer firmware available for your machine. Grbl .9 is ancient and technically not supported --- although I do try to make it...
So long as it is a standard Arduino with a boot loader already loaded you should be able to flash the latest and greatest 8 bit version of grbl. Be...
do you mind sharing what your GRBL Control tab looks like now that we have $10 set to 3? I just took a quick look at the code and if...
M3S#### with #### being some number within your min and max spindle speed settings. I'm closing the issue. Fill free to open a discussion thread if you would like to...
Shortly before writing up this issue I was at my CNC machine and I had turned turned the spindle on (M3 S10000). While the spindle was running, I executed a...