Vasily Evseenko

Also it is interesting that booting kernel from friendlyarm (I've build it from their sources) using stock u-boot (from @inindev) results in partial working hardware: - kernel crashed due to...

@ajayramaswamy How to configure, build and install this version of u-boot for R5S? Do any additional patches required?

@ajayramaswamy I've tried following branches: rk3568-2023.10, rk3568-2023.07.02 and tag rk3568-2023.07. No success. Behavior still the same - No NVMe detect on boot and device freeze after pci rescan. Also I've...

@inindev Do you use debian 12 kernel 6.1 or build custom 6.4? I ask this because dtb is from 6.4 and 6.1 doesn't have dtb files for R5S

I've tried linux-6.5.0 from debian-sid. Also no success. It seems the problem is in kernel (or dtb) because u-boot see NVMe drive and can read a partition table.

I've tried and behavior was the same - no nvme device during boot and stuck device after pci rescan > > Device 0: Vendor: 0x15b7 Rev: 112000WD Prod: 23041F800808 >...

I've tried his u-boot builds and no success for nvme support in subsequent linux kernel boot (see my replies to @ajayramaswamy above) > > This is the shell script I...

My drive is [wd red sn700 2TB](https://www.amazon.com/Western-Digital-SN700-Internal-Devices/dp/B09H1D7Y93) It works with friendlyarm's system (based on debian 11 with custom 5.10 kernel and u-boot) > > I've tried and behavior was the...

@inindev Unfortunately this doesn't help with WD Red: ``` $ cat /proc/cmdline root=UUID=6bbd00fc-aec1-45cc-a200-19e3acfd81a0 ro pcie_aspm=off rootwait $ uname -a Linux nanopi-r5s-arm64 6.1.0-10-arm64 #1 SMP Debian 6.1.38-1 (2023-07-14) aarch64 GNU/Linux $...

It seems that only differs by firmware. WD Red designed for write-intensive tasks like CCTV cameras or NAS > > @inindev Unfortunately this doesn't help with WD Red: > >...