Sam Shum
Sam Shum
@Pari-singh I encountered the same situation, the variable "detections" returned from "darknet.detect_image()" seems to always be a empty array (Not None) with zero length.
@bluetjens Hi, did you figured out the problem in the end? Any information on this would be helpful, thank you!
In industrial application, people use something like CANopen. Maybe we can take a look at how they implemented it? (If only VESC is CANopen compatible)
Another direction is to use hall sensor at hall sensor/encoder port, and AS5047D at UART/ADC 7-pin port using hardware SPI. In this case if I use hall sensor for motor...
Hi I am trying to setup GPS sync for livox lidar as well. I supplied PPS pulse and sent GPRMC, the lidar timestamp_type becomes 4 (PPS) and stuck there. It...
similar setup, same problem. @bxc237 by any chance you figured out what caused the randomly disconnect issue?
> hello，I have the same problem, can you tell me your solution? 3Q -_- I was not able to find a solution for this. If you were able to crack...
@ZHG169 unfortunately nope. I moved on to other projects. DJI need to fix their stuff and documents stuff better. Letting user brute-forcing to see which setup works is unacceptable.
> Hello! I'd like to synchronize the Avia lidar with GPRMC, and I connected wires following the wiki tutorial. Everything looks fine. Before launching it in ROS, I tested the...