Stian Indal Haugseth

Please advice what's the next step here for me or if it's only resting on approval.

> Just to be sure: This is really only for Raspberry Pi and software which uses the legacy RPi camera API while the modern libcamera driver/API + KMS is enabled,...

@MichaIng I have updated the sample config file with your suggestions. I do not have permission to edit the Wiki.

> I'm now out of ideas. @strips do you have ideas on why the debug logging (see the gist linked in above [comment](https://github.com/motioneye-project/motioneye/pull/2765#issuecomment-1816993492)) isn't showing anything related to libcamerify even...

@zagrim It did work but it also crashed sporadically. It could work for a few hours or a few days. I think it could not restart itself after some kind...

@zagrim > @strips Do you have ideas on debugging this? How are those "libcamerified" cameras supposed to be shown in ME? I supposed they will not show as MMAL even...

Have the same issue. Can pair the device but it's non responsive after pairing and successful configuration. [1.31.0](https://github.com/Koenkk/zigbee2mqtt/releases/tag/1.31.0) commit: [f440c86](https://github.com/Koenkk/zigbee2mqtt/commit/f440c86) ConBee/RaspBee Firmware build date 20210520 Firmware version 1.0.006 Model [T2037](https://www.zigbee2mqtt.io/devices/T2037.html#ikea-t2037)

I never got the libcamerify to work but still feel it should have. Might give it a new try one day. Anyways the motion project is old and will never...

@mgrn0, I'm using this with motionEye. Effectively creating a network stream from the camera and configuring motionEye to use the stream as a source. All running on the same RPI4.

@bigOconstant screen is a simple (ugly) way to run a background process. Could probably use nohup or set up proper daemon instead. I tried nohup but one of the commands...