stooged
stooged
see if the updated version works
`pppwn64` is for all 64bit devices `pppwn7` is the default for 32bit and should work on most devices `pppwn11` is for 32bit on very early models listed below >Raspberry Pi...
> I upgraded my printer to 10SPro_BIL_DW7 from an old 6.x version today and I found Octoprint didn't connect using the previous working baud rate of 115200. Using 250000 did...
i have tested with my pi 3b+ both 64bit and 32bit os and it works so i am not sure what to suggest. maybe try change the os, you you...
The enc28j60 cannot run directly connected to the console. I assume this is because it has no mdi/mdix detection. You can get it to work by using a switch. ENC28J60...
added a button on the web ui "Network Settings" which will allow you to change the pppoe server info
there are writes in the log files... `/boot/firmware/PPPwn/pwn.log` if you enable verbose pppwn `/boot/firmware/PPPwn/upd.log` when you run the update when you save settings in the web ui `/boot/firmware/PPPwn/config.sh` and `/boot/firmware/PPPwn/pconfig.sh`...