stinkerton18

Hi James, The ISO images you're using, are you using the same ones on the SCSI2SD? I happen to have a SCSI2SD and rPI v2.3 full spec board, and Adaptec...

It's completely up to you whether to use Discord or not honestly. I can work with you here just as easily. I stand corrected, my DOS machine has an AHA-2940...

Currently building a fresh RaSCSI build with the latest Raspberry PI OS Lite and latest GA/Production release. I'll be using the aspicd.sys driver (https://www.hiren.info/downloads/dos-files) for the RASCSI CD devices. My...

Preliminary investigation, I can reproduce this issue with 2 different ISO files (both uploaded using SSH and web interface). At debug level, the following lines are logged each time a...

After doing several iterations of tests and combinations, here's what I have found thus far: Under Linux the Adaptec 2940 and RaSCSI work, contents of the CD can be read....

After a bit more experimentation, the OrangeMicro advancd.sys CDROM driver does indeed work with Adaptec's SCSI ASPI Manager _and_ MSCDEX.EXE. I was able to boot my MS DOS 6.2.2 machine,...

As an added bonus, the ADVANCD.SYS CDROM driver does support LUNs (add /L in the config.sys line). This would allow for more than 7 CDROM drives to be added/available. I...

It should be 1 image per SCSI ID/LUN combo, so SCSI ID 6, LUN 0, SCSI ID 6, LUN 1, etc. Older cards may not support LUNs though. The oldest...

Ahhh yeah, there's not much for ISA cards but there are some sub-$20 ones on eBay. VLB cards are not worth the cost over a different 486 board with PCI.

According to the error in the service start logs in your screenshot, the piscsi service failed to start with "Error: Can't attach devices". This is usually an indicator that either...