Ster1um

I find this ``` ///// POWER ON BEH. OFF Frame 2638: 52 bytes on wire (416 bits), 52 bytes captured (416 bits) on interface -, id 0 IEEE 802.15.4 Data,...

Add others function: MIN. BRIGHTNESS ENDPOINT 2 ``` MIN. BEFORE SELECTION THE MIN. BRIGHTNESS Frame 8792: 53 bytes on wire (424 bits), 53 bytes captured (424 bits) on interface -,...

> I've checked the power on behaviour but this should be the same as Z2M sends, can you also sniff the messages when setting it via z2m so we can...

> Can you explain what you mean with: > > > MAX. BEFORE SELECTION THE MAX. BRIGHTNESS > > > MAX .AFTER SELECTION THE MAX. BRIGHTNESS hello, after send command...

Thanks for works but work partial It doesn't work on the z2m frontend page, work only from physical button. if you need the tuya code ``` min bri l1 code...

With your external convert, the selection of switch type doesn't work

> https://gist.github.com/Koenkk/0316c10873dcc48905c6e8f63fa4b09c this doesn't work 😥 I read the code from tuya devoloper board.

in the 1st version off this converter ``` const fz = require('zigbee-herdsman-converters/converters/fromZigbee'); const tz = require('zigbee-herdsman-converters/converters/toZigbee'); const exposes = require('zigbee-herdsman-converters/lib/exposes'); const reporting = require('zigbee-herdsman-converters/lib/reporting'); const extend = require('zigbee-herdsman-converters/lib/extend'); const ota...

> Can you sniff the traffic when just turning this device ON via the TuYa gateway? see this attachment 1 of 2 [https://pastebin.com/X9KyW3c7](url) 2 of 2 [https://pastebin.com/XrMh95tA](url)

> Can you provide just the command that was send when turning on the device? Sorry, I realized you need another thing... I think you need the packet from initial...