starbasessd
Nevermind. You have bootloader version dated 1/25/2022, which is being found to break the startup of motionEyeOS (even dev20201026)... Related to another issue, and is being researched.
Once the board is up to 1/25/2022, it doesn't matter if you flash it back, it's still broken. How to get around it is still being researched. For now, you...
Buying a new Pi4 if it has the 2022 versions of the boot loader will have issues. If you buy PiZeroW, Pi2 or Pi3, you should not have any issues....
Well, a direct write to a local drive is faster due to several issues: Not using a separate service to send data Network bandwidth needed to send data Resource usage...
The [iSpy database](https://www.ispyconnect.com/camera/dahua) recommends this URL: rtsp://192.168.1.108:8554/cam/realmonitor?channel=1&subtype=00&authbasic=YWRtaW46YWRtaW4= using your camera's user & password.
Don't use the HA installation. Uninstall it, and install motionEye from [here](https://github.com/motioneye-project/motioneye/wiki/Installation) for your particular setup/OS or use the Docker version.
Same Difference.
You can't use a normal release on a PiZero2W, you have to use the image discussed [here](https://github.com/ccrisan/motioneyeos/issues/2875)
The format of the wpa_supplicant.conf file needs to be: - - - - - ctrl_interface=DIR=/var/run/wpa_supplicant GROUP=netdev update_config=1 country=US network={ ssid="your_SSID" psk="your_password" } - - - - - Country needs to...