Paul Staron

You are sending GNSS data every 7.5 seconds? That's rather a lot unless moving fast. Does it start working again after a power cycle reset? What exactly is the device...

If it restarts then you may have power supply instability problems if you are not using the battery. But its also good practise, well essential tbh, to regularly check your...

I could use some documentation on each function. it's difficult to know which function is blocking, has a specified or adjustable timeout and what it returns without trawling through the...

Before you waste too much time with the 7070 and 7080, you might want to take a look at this information below. https://stackoverflow.com/questions/61857667/sim7080g-module-cant-send-data-over-tcp-while-using-gnss/61884727#61884727 I got caught out and will stick...

Here is some useful information. https://github-wiki-see.page/m/botletics/SIM7000-LTE-Shield/wiki/USB-Drivers Win8 driver works on Windows 10. Once the drivers are installed connect the module to USB AFTER you have a attached an LTE antenna!!...

Connects to MQTT broker and works on pubsubclient for us on 2G and CAT-M1. Check with your SIM supplier that it can support 2G , CAT-M1 or NB-IOT. Not all...

I haven't tried for a while but I used something like this, you will have to adjust the network and band settings to suit your location. Initialise with modemSTART then...

Hi I. I'm using the SIM7000E PCI-e module on a ESP32-PCI-e board. Arduino v1.8.13 IDE ESP32 board v1.0.6 TinyGSM v0.10.9 library Arduino PubSubClient library v2.8.0 Arduino Json v6.18.5 Emnify SIM...

We decided to use SIM7600E (4G) modules, slightly more expensive than 7000 but we're not sure if and how much LTE-m and NB-IOT will be available across Europe and which...

We only use the 'main' antenna. I didn't notice any signal improvement when I tried adding an 'aux' antenna , but it may only be for 3g. We use Lynx...