Paul Staron

Based on Timothy's example above. This works, I'm using a random subscribe topic and testing for "rls" to override the example's samplingRate. I have a 20 second timeout, if you...

The SIMCON MQTT does work, however its very slow compared using regular TCP data and PUBSUB. Its a Modem issue not the library. Also the Fona library needs UART interrupt...

I use the TinyGSM library: https://github.com/vshymanskyy/TinyGSM This supports MQTT connection through pubsubclient: https://github.com/knolleary/pubsubclient This does not have SSL connection whereas the SIMCOM built in MQTT does have this available. TCP...

You need to post this question on TinyGSM site really. Afaik you can only have one instance of pubsubclient running at any one time. I think that's where your Unhandled...

Thanks Timothy, I'll go with your advice, tried the 7000 MQTT example and works great, thanks for your hard work. I have since found this.. https://stackoverflow.com/questions/61857667/sim7080g-module-cant-send-data-over-tcp-while-using-gnss/61884727#61884727 So I don't think...

@jwallis Yes it is working fine where I am in North Spain. I use a ESP32 for my controller. I'm using the SIM7000E but haven't tried any field tests yet....

Antennas make a huge difference. PCB and self adhesive type aren't very good. I use something similar to this: https://www.amazon.ca/dp/B07VQPDXLH/ref=sspa_dk_detail_1?pd_rd_i=B07VQPDXLH&pd_rd_w=2j4ry&pf_rd_p=2c17e944-5508-41c9-9e34-6115f0c88f84&pd_rd_wg=EGIko&pf_rd_r=8R1HGWHZZPZBW01F3X3F&pd_rd_r=c405a3a1-42b0-4a33-afe3-6be9c5fda53e&spLa=ZW5jcnlwdGVkUXVhbGlmaWVyPUExSUxJUEtZRTdIRzgwJmVuY3J5cHRlZElkPUEwNjMyODg5MUs5VVMyN09UQUMyUSZlbmNyeXB0ZWRBZElkPUEwNDAyOTUyMlRINVRMWTFaQ0E0USZ3aWRnZXROYW1lPXNwX2RldGFpbCZhY3Rpb249Y2xpY2tSZWRpcmVjdCZkb05vdExvZ0NsaWNrPXRydWU&th=1 Check the antenna gain at the band frequency you use...

+1 one this for me and 'output' needs to be collapsible or optional too, takes up too much space. 

I've moved over to PlatformIO. I don't think I would go back even if the Arduino dev guys do finish the job. Sits on to top of VS Code, takes...

Using WiFi events, ``` WiFi.onEvent(WiFiConnected, SYSTEM_EVENT_STA_CONNECTED); WiFi.onEvent(WiFiGotIP, SYSTEM_EVENT_STA_GOT_IP); WiFi.onEvent(WiFiLostIP, SYSTEM_EVENT_STA_LOST_IP); WiFi.onEvent(WiFiDisconnected, SYSTEM_EVENT_STA_DISCONNECTED); ``` Working on version 1.0.6 Get this on version 2.0.1 ```no matching function for call to 'WiFiClass::onEvent(void (&)(arduino_event_id_t,...