stanvn

I have created a [repository](https://github.com/stanvn/zigbee-plant-sensor) with my application for Zigbee. @rbaron I hope you don't mind that I added references to your project, if so please let me know.

That sounds like a good idea. I think it is best if you add it as a submodule in `experimental/`, in that way changes I make will automatically be updated.

Thanks for your issue, I have seen similar problems by others. I know for a fact that Zigbee is not a self repairing network, or at least it will not...

Maybe it is a re-connection problem. I'll test it by manually removing links and see if it reconnects properly.

I found an issue in the [know issues](https://developer.nordicsemi.com/nRF_Connect_SDK/doc/latest/nrf/known_issues.html#zigbee) from the nRF Connect SDK. I've implemented the proposed workaround in the main. Hopefully the issue is now solved

No problem, I've been busy too. Here is a link to a hex file so you can test it. https://drive.google.com/file/d/1LK-mcJxXOtrW712IEFpojefQ2F1zVAYD/view?usp=sharing

That is not how it should work indeed. I'll check the hex file again later. Maybe I added the wrong file.

Looking good @rbaron. Migrating to nrf-connect SDK is a good choice in my opinion. > @stanvn being that b-parasite and your project is open source hardware I'm curious to hear...

That is actually a really good point. I though having the button available from the outside would become handy. But if it is only used for factory reset there is...

@oleo65 your are using ZHA I assume? @bbadaboom what are you using? I've place one sensor in the freezer and for me it works fine as you can see in...