SQFMI

We're trying to export the STEP file for the board but we're still missing some 3D models (e.g. FPC connector, battery clip, etc.) Once we have those created (or if...

Thanks @chunkysteveo! We're still missing an accurate model of the 5-way switch and the FPC connector, but we're going to share what we have for now so folks can get...

Yes and thank you for submitting the PR! The 3D model is now complete! 🍾

This is great! We'll add this fix in the next HW revision!

GPIO9 is used by the ESP-12 for internal flash memory, so using it will cause resets. You can sacrifice the direction pins to use as GPIO, but note that GPIO1,3...

You can sacrifice the direction pins to use as GPIO, but note that GPIO1,3 are shared with TX/RX, so serial cannot be used concurrently with these pins. GPIO10 is also...

Could you check to make sure the screen's ribbon cable is properly attached to the connector? This happens sometimes when it's loose or misaligned.

The connection looks good. The display appears to be not refreshing the whole screen, but just the misaligned section. The only time we've encountered this is when the ribbon cable...

Could you also try power cycling a few times, and using a different USB cable/port?

@mrWheel what type of battery is being used?