kyria

kyria copied to clipboard

I added the stl and source files for my modification of the 3D print case that supports tenting. I also updated the main readme file to preview both of the...

jhelvy

Adding a High Profile five column acrylic case with puck support

louckousse

Adding an alternative 5x3, high-profile, tenting case.

bromanko

Missing files: Kyria HiPro Case Plate, No Puck

2

Latest versions of **Kyria HiPro Case Plate** (_0.1mm Kerf_ and _No Kerf_) are **Puck versions** both. I would like to have **No Puck** versions too, but I have no software...

LuisMorenoSerrano

This file seemed to be missing in the repo. I opened the `Kyria Plate Case Bottom - 6 columns - Puck - 0.1mm Kerf.dxf` up in Fusion 360 and removed...

rtrajano

Hello, Thanks for all the awesome work here. I'm planning on cutting the Plate Case, but it seems like one of the files is missing. For the bottom plate, there...

timtraversy

This adds STL files for a low-profile 3D printed case with tent leg attachment points. The low profile front lip is handy when using Choc keys. Includes unmerged content from...

hmbenner

The extruded form of the plate dxf file was slightly too tight, and caused some issues. I've updated the plate STL and offset all switch openings by .25mm. This new...

onnenon

Add case files for 5 column kyria

2

Adds files for kyria with 6th column of PCB snapped off: - High Profile Case - 0mm kerf - 0.1mm kerf - Additional top layer with integrated OLED guard for...

obosob

Add Simple .STL Converted Case Model

4

The-Royal