spiralshapeturtle
spiralshapeturtle
@eopo today started with pagermon, It seems the readers.sh always uses the first capcode found, and within our GroupCall network that's always the FLEX group code. Which means the aliases...
When I run the file where you added some extra code: ``` Using device 0: Generic RTL2832U Detached kernel driver Found Rafael Micro R820T tuner Tuner gain set to automatic....
> Hey @rodeho, thanks for testing this branch! The problems you had are based on the fact, that multimon-ng did change the output format for group calls a few versions...
``` FLEX|2024-04-14 17:14:14|1600/2/K/A|03.081|000709643|ALN|Graag telefonisch contact MKB FLEX_NEXT|1600/2|03.081.A|0000709643|SS|5|ALN|3.0.K|Graag telefonisch contact MKB FLEX|2024-04-14 17:14:31|1600/2/K/A|03.090|002029568 000126999 000123126|ALN|A1 11126 Rit 53354 Jacob Rekstraat Zaandam FLEX_NEXT|1600/2|03.090.A|0002029568|SG|5|ALN|3.0.K|0000126999|0000123126|A1 11126 Rit 53354 Jacob Rekstraat Zaandam FLEX|2024-04-14 17:15:07|1600/2/K/A|03.109|001180000|ALN|TESTOPROEP MOB...
> Looks good. Did you receive FLEX group messages or fragmented FLEX messages in that time? Would be nice to now! We have fragmented messages every day at the same...
I have got the same issue. Are you running a virtualized host via proxmox? If I look into proxmox VM stats I can see exactly the connection timestamps from the...
@fichtner Hi Franco as you mentioned [here](https://forum.opnsense.org/index.php?topic=36861.new;topicseen#new) there might be a relation to this bug. I also have Zenarmor installed with the native NMAP driver. I enabled debug logging and...
Could it be in my case OPN is looking for a public IP while my ISP only provide DHCPv6-PD /64 for the LAN interface? My PPPoE session only knows the...
> Maybe a simpler solution. > > Write to an MQTT broker and let the different hassio read the sensors they want/need. That could be a solution, let's dig into...
> Maybe a simpler solution. > > Write to an MQTT broker and let the different hassio read the sensors they want/need. @jan-dewit and I got it rolling, working fine....