SparkFun_RTK_Firmware
SparkFun_RTK_Firmware copied to clipboard
sparkfun
Centimeter precision GPS/GNSS using L1/L2 signals broadcast over Bluetooth SPP (using the ESP32) in an easy to use enclosure.
### Subject of the issue Im seeing issues similar to https://github.com/sparkfun/SparkFun_RTK_Firmware/issues/257 : Setup: RTK Express (as a base) Wifi Mobile Phone Hotspot RTK2Go Symptom is that the Express randomly drops...
### Subject of the issue US Facet L-Band units being moved to UK/EU theater, the auto-set operation may overly cumbersome and opaque. https://portal.u-blox.com/s/question/0D5Oj00000E3f9tKAB/pointperfect-perfomance-in-the-uk https://github.com/sparkfun/SparkFun_RTK_Firmware/blob/main/Firmware/RTK_Surveyor/menuPP.ino#L1154 Looks to make a determination when...
The ability to communicate with multiple NTRIP servers is a good thing. [This PR](https://github.com/sparkfun/SparkFun_RTK_Firmware/pull/766/files) implements most of the work. The serial UI and web config UI need fixing.
Enable the RTK to transmit NTRIP data to up to two NTRIP servers at a time. When failures occur, independent recovery is possible. This change uses an extra 536 bytes...
### Subject of the issue As soon as the Facet is bluetooth connected, there are a lot of `sd init failed` message when you read the serial output ### Your...
Most common on the RTK Facet/Facet L-Band, device will turn on briefly showing the SparkFun logo before turning off again. Cause: This is due to leakage current on the BAS16J...
### Subject of the issue Over 8 hours yesterday, I ran a survey with the new 4.0 firmware. I've had occasional disconnects before, but the new version seems particularly unstable,...
A handful of users are looking to display the HPA in ft/in on the display and serial terminal. NMEA is unaffected and the GIS app will handle any other conversions....
### Subject of the issue I get some checksum errors in ubx file ### Your workbench * What version of RTK firmware are you running? v4.0 * What radios are...
### Subject of the issue The usb serial or BT console spews `zedEnableLBandCorrections: Unknown platform` `zedEnableLBandCorrections: Unknown platform` `zedEnableLBandCorrections: Unknown platform` continuously, and endlessly, and an RTK Float or Fix...
