SparkFun_RTK_Firmware

SparkFun_RTK_Firmware copied to clipboard

### Subject of the issue The logger doesn't write to the SD card the last minute when you power it off ### Your workbench * What version of RTK firmware...

Stefal

In RTK base station mode, support Trimble systems with RTCM 1008 message.

1

### Subject of the issue In order to use the device as a base station for Trimble, it needs to transmit a RTCM 1008 message (Antenna descriptor) Best would of-course...

magnuan

Fatal error: configure via WiFi AP while running PVT server

2

### Subject of the issue When switching to AP config mode while the PVT server is running and not connected to any WiFi, a fatal error occurs and a hard...

DavidBerschauer

WiFi Password entry does not like "9.876543"

1

First reported on forums [here](https://forum.sparkfun.com/viewtopic.php?f=116&t=60755).  Password getting rounded and look like is it being treated like an int instead of a string.

nseidle

Add support for HI and APC-ARP in rover mode

10

This is an enhancement request inspired by #269. NMEA from the F9P gives positions of the APC. It's an interesting question what people really want for positions, and it's a...

gdt

WiFi does not work in "config" the first time entering "config"

12

My setup is an RTK Express running firmware version 3.8. In "non config" mode, the RTK Express pulls a DHCP address and properly joins the network. Things work as expected....

dwightbrew

### Subject of the issue Now that the profiles are numbered, the addition of the profile number to the display would help me to remember which profile I was working...

skyviewaerials

### Subject of the issue Allow the user to specify the log file name to better organize their log data. There are industry standards for these file names, and SFE_FACET_yymmdd_hhmm.ubx...

tonycanike

PointPerfect L-band keys missing at power on with Custom Thingstream device profile token

2

### Subject of the issue Using custom hardware based on SparkFun ESP32, firmware v3.5 and v3.7, you must go to PointPerfect setup, Disable PP, Enable PP, then exit, now L-band...

edgecase14

Add PointPerfect support for non L-Band RTK products

19

### Subject of the issue PointPerfect for RTK Express Plus Support https://docs.sparkfun.com/SparkFun_RTK_Firmware/configure_pointperfect/ ### Your workbench Dev 3.5 with express working as a ntrip server via rtk to go. Right now...

j-w-bullfrog