SparkFun-KiCad-Libraries

SparkFun-KiCad-Libraries copied to clipboard

Conflict between KiCad and SparkFun RF footprints.

1

* Prefixed all existing footprint directories with 'SparkFun-' in order to distinguish from existing KiCad footprints. * Additional benefit of matching existing SparkFun libraries.

McNeight

The footprint TQFP32-08 (at least) has all its pads oriented at 0º, but with the top/bottom pads having their height and width swapped from the left/right pads. This means when...

jey5nd6

Suggest adding `sparkfun_` or otherwise to avoid conflicts. Currently the `RF.pretty` conflicts with default kicad library `RF.pretty.`

ianahner

Remove from SMD caps and resistors

marshalltaylorSFE

lewispg228

AMV1993

-used default kicad package (SOT-583-8)

lewispg228

MIC5219-2.8YM5

3

lewispg228

Change PTH pads to "F.Cu, B.Cu, and connected layers"

1

I believe all our footprints with PTH pads have the "Copper layers" setting set to "All copper layers" like so:  However I would like to suggest changing them all...

sfe-SparkFro

First off, all footprints should really have a courtyard to ensure DRC catches any accidentally overlapping parts. Second, if a user wants to solder headers onto a board, there needs...

sfe-SparkFro