Top/bottom and left/right pads have same orientation

[jey5nd6]

The footprint TQFP32-08 (at least) has all its pads oriented at 0º, but with the top/bottom pads having their height and width swapped from the left/right pads. This means when Kicad does a Push Pad Properties the "don't modify pads with different orientations" doesn't work.

The pads should have the same widths & heights, but one set should be rotated 90º from the other.

Ref: https://bugs.launchpad.net/kicad/+bug/1836137