Waldek

Hi Rob, Thanks for the suggestion. I have use latest version svxlink I have configured remotetrx with Alsa loop RX and connect logic remoteTRX in svxlink via 127.0.01 to remotetrx....

Hi Tobias, The loop configuration: ``` pcm_slave.hw_loopback { pcm "hw:Loopback,1,2" channels 2 format RAW rate 16000 } pcm.plug_loopback { type plug slave hw_loopback ttable { 0.0 = 1 0.1 =...

Hi, Good news that thanks to the author of the RadioLib library Jan Gromešb https://github.com/jgromes/RadioLib support POCSAG protocol RX and TX [POCSAG](https://www.sigidwiki.com/wiki/POCSAG) using 2-FSK for modules: SX127x, RFM9x, RF69, SX1231,...

Hi, It would be interesting to build low-cost an RX pager for DAPNET based on: Arduino Pro MINI Si4432 radio board OLED or other low power DISPLAY TFT 1.8'' DC-DC...

Hi Kristoff and Manoel, Kristoff, thank you for such a comprehensive explanation of the topic. I do not have as much experience as you, but I was looking for a...

Hi Manoel, It looks promise. Maybe you need to add a buzzer to play a sound when a new message arrives.

Hi Manoel, This is a very nice project and if it will work with the POCSAG protocol, we will have an alternative for commercial PAGERS. It would be good to...

Hi, I have found example used SX1278 (RFM96/98 radio module) https://teknokoodiradio.vuodatus.net/lue/2017/06/semtech-sx1278-fsk-packet-mode-decoding-with-arduino At current when POCSAG transmission is available in MMDVM project ( https://hampager.de/dokuwiki/doku.php?id=mmdvm ), we can be observed growing up...

I agree that it would help us when we give in Address= the name of the server which has dynamic IP. Currently, I have to script check if the server's...

Today on my Pi-Star where is MMDVHost: MMDVMHost-20210617_PS4 is running and DMRGateway: M: 2021-11-16 19:53:09.629 DMRGateway-20210617_PS4 is starting M: 2021-11-16 19:53:09.629 Built 16:43:56 Jun 17 2021 (GitID #03bcdbc) Show in...