Daniel Dole-Muiños comments

Results 8 comments of


Daniel Dole-Muiños

Unable to Enable Bias Tee with Config File

I was able to work around this by modifying `rf_blade_imp.c` within srsRAN. My patch is [here](https://github.com/Nuand/bladeRF/files/8336659/srsRAN_biastee_rx1.patch.txt). With this method, the user is at no point prompted to enable the bias...

gr-osmosdr with gnuradio 3.7

Hello, I have also encountered this issue on the GR3.8 branch of gr-osmosdr, using SWIG version 4.0.2. What could cause this bug?

srsUE/bladeRF Difficulty Syncing with Real eNodeB

Hello all, Have spent some more time on debugging this, and have some additional insight to share. I was able to test closer to the real eNB, and was able...

Does it support new BladeRF 2.0 micro xA9/xA4?

Do you recommend the bias tee when using BladeRF with LTE signals? I've been trying to sync to a real eNB using my BladeRF 2.0 micro xA5, and have been...

srsLTE connect one EPC to multiple eNBs using ZeroMQ

Hi, please refer to my reply in #818 regarding a multiple UE/single eNB setup.

srsUE can't attach commercial network with LimeSDR-USB

Hi, I'm by no means an expert but I've spent a good deal of time recently looking into the RA/RRC system within srsUE. It appears as though you've hit the...

Someone knows what is this? Works fine 1 week ago

Also might be worth ensuring that your user is a member of the plugdev group, and if not, adding them. I found srsUE behaves slightly differently in relation to SDR/driver...

We don't support the UE on a Pi4. Running a full UE on the Pi4 is quite challenging as the requirements are higher than for the eNB.

Thanks for the insight on the RPi. Not sure how I missed that post from Andre a couple weeks back... I had indeed hoped to run srsUE on my RPi4B....