songruo
songruo
Hi @combalafra01, I checked the PWM IO (without any load) using logic analyzer, it outputs the signal fine. I think your usage of PWM to the servos is strange. You...
For your initial code with two servos, try to set `SERVO_FREQUENCY` to 100Hz (so that the frequency to the servo is 50Hz), and adjust the duty cycle accordingly to give...
Hi @hiroshi3117, Yes, this feature has not yet been supported on C6/H2. Please hang on with us for a few days, I will do some update or give you a...
@hiroshi3117 Thanks for the waiting! Recently, we merged a support that allows RC_FAST clock to be kept working during light sleep on ESP32C6/H2 (1a6060fa3ab7dc171b597d4633c39b592890322d). With including this commit + `gpio_sleep_sel_dis(LEDC_OUTPUT_IO)`...
@tshcherban You are right! We are aware of this issue, the MR to add the PM lock to UART driver is under internal review.
It has been fixed in 235bb6f on master. Backports to earlier versions is undergoing.
@AxelLin Here you go https://github.com/espressif/esp-idf/commit/9b0d8032379d20fd28419382704881bdc09bcd6e
For ESP-RISC-V CPU, it would latch the state of an "edge" type CPU interrupt signal on its rising edge (see Technical Reference Manual > ESP-RISC-V CPU > Interrupt Controller >...
Hi @nkaaf, In the TRM, it didn't say this field has a default value of 256 (shows `x` in the screenshot from the TRM). It only says if you want...
@nkaaf No, I don't think 257 means anything.