Simba Zhang
Simba Zhang
You should only run dummy accounts during API updating time frame. I have same situation with @paganoll. And I also run it yesterday evening. You need add random alive pause,...
Detector can't detect a camera disconnect event, it's a status change from home-assistant side, need figure out how to configure a event triggered by device status changes from home-assistant.
No GPU based library available on Raspberry Pi 3 for now, so it's CPU only. One frame would cost 4-8s.
@aureosun If you are using Tensorflow, you can try to quantize the module. [A how to](https://petewarden.com/2016/05/03/how-to-quantize-neural-networks-with-tensorflow/)
You can setup username and password by visiting connection section: 
You can set Automatic to ‘No’ to setup username and password manually. On Tue, Jun 7, 2022 at 9:35 PM KenaHemnani ***@***.***> wrote: > This is what I am able...
@KenaHemnani when you have this page, make sure you have a url can be played by ffplay, then you can copy paste the url into Full URL Path: , you need signup with http://165.232.62.29:3000, then add your device serial-id to...
@KenaHemnani we don't have to worry about shinobi after you have seen preview pic on it, we use it for camera configuration. you should follow the [instruction](https://github.com/SharpAI/DeepCamera#label-on-web-gui-train-face-recognition-model-on-device) to label face...
@KenaHemnani Please provide the system log and your hardware configuration, are you using jetson nano?