Kris

I use 2 different power supplies, one for the PI and one for the LED-strips. You need to make sure to connect the GND of both power-supplies together, otherwise you...

I’m also looking for something „similar”, but even a bit more „complicated”. I’m looking for a possibility to define a second array of LEDs for left, right, top and bottom....

That blue light is caused by the USB video dongle. When it receives no signal, it turns the screen blue. I also don't want to turn of my Pi, so...

Solve it the easy way: - take a PIC (or an AVR), and put an IR receiver on it, a transistor, and a relais. - write some code to react...

I had the same problems … - make sure, that if you do a 'lsusb', you see a device in the list, with ID 1b71:3002 ... This is what worked...

It's almost 2 a.m. Here. Can you post your output of lsusb? Verzonden van op mijn Acer Iconia Android tablet SchruteRampage [email protected]: > I added the lines to /etc/modules and...

I received my WS2801 LED-strips yesterday (bought via Ebay China). Today I did some testing. - Simply output 3 full bytes, Red, Green Blue via SPI. (e.g. 24 bits in...

Yes, I don't see why they would work different. I'm using the 52 LED/m strips btw ...

Actually, the RPI doesn't use that much electricity, so I let it running all the time. (so I also don't have "startup time". However, I use a separate power supply...

Hello, I never used a computer for playback. my blu-ray discs are played-back with my PS3, using an hdmi 1.4 cable. the HDMI2composite adapter is the same as referred to...