smulle48

Anyone got some good pointers? My energy meter uses 10.000 imp/kwh and from what I can see in HA, it reports less then used. On the charger for my car,...

With 10.000 blink/kwh, im using this settings and are within +/- 50-100w when using 10 kWh. https://github.com/smulle48/home-assistant-glow/blob/main/home_assistant_glow.yaml Another thing I have done, is that I have done the exact opposite...

> I currently use the default values of https://github.com/klaasnicolaas/home-assistant-glow/blob/main/home_assistant_glow.yaml except for some obvious things like AP and password settings. The contents of the yaml has `internal_filter` commented out, which mine...

> I see that you use more filters from an open pull request, would that possibly make a difference in the result? In my case they made a huge difference...

> Is there anything specific I should test out first of the yaml @smulle48 links to? I'm too unfamiliar with the filtering and I'd rather take an approach of changing...

You can try to change the pulse_pin to GPIO26. When I used GPIO12 I also got skipped and sometimes too many blinks. The ESP32 got touch input and that somehow...

Btw. Your pulse length is about 220ms at 5kw load, so you should use a number around the half of that for the filter, not 10ms

@Dennis4b will definitely try this asap and report back 👍

Might be an idea to use the GPIO pins from 16 and onwards :-) https://randomnerdtutorials.com/esp32-pinout-reference-gpios/

I got the same problem. Only the first instance gets populated with data. The second one does not