SONOFF-SNZB-02-Temperature-and-humidity-sensor

SONOFF-SNZB-02-Temperature-and-humidity-sensor copied to clipboard

Maximum report_delay is only 60 seconds with latest firmware

8

Values higher than 60 seconds are not accepted. Error in zigbee2mqtt log (example 120 seconds): error 2023-04-17 23:30:31: Publish 'set' 'report_delay' to '0x00124b00290f7b50' failed: 'Error: Write 0x00124b00290f7b50/1 genPowerCfg({"513":{"value":120,"type":33}}, {"sendWhen":"immediate","timeout":10000,"disableResponse":false,"disableRecovery":false,"disableDefaultResponse":true,"direction":0,"srcEndpoint":null,"reservedBits":0,"manufacturerCode":null,"transactionSequenceNumber":null,"writeUndiv":false}) failed...

peteho

Can’t set levels or enables as UNSUPPORTED_ATTRIBUTE

1

I am getting errors stating UNKNOWN_ATTRIBUTE in Zigbee2mqtt when trying to set any of the temperature or humidity high / low levels or to switch on or off the enable_temperature...

Mother-Goose

I have installed _SNZB-02_EFEKTA_H.hex_ and am just doing some tests. Control of temperature works as expected but there seems to be an issue with humidity control. My settings: - enable_hum:...

obrain17

Is it possible to update sources to the latest .hex firmware with an extended number of attributes(comparison_previous_data and etc)?

nordeep

Hello, Does this also work after the flash with deCONZ (Conbee II)? The standard firmware is currently very unreliable. A few devices keep losing connection with the original firmware. Does...

Mephisto090

Sensor no longer reports any values except LQI

3

Hey, The sensor was working fine for a while, it was bound directly to a relay. A few weeks ago it stopped reporting anything and controlling the relay. Thought the...

djbiti1