Can’t set levels or enables as UNSUPPORTED_ATTRIBUTE

[Mother-Goose]

I am getting errors stating UNKNOWN_ATTRIBUTE in Zigbee2mqtt when trying to set any of the temperature or humidity high / low levels or to switch on or off the enable_temperature or enable_humidity.

the log entries when I try to do this are as follows. 2023-08-25 13:00:34Publish 'set' 'high_humidity' to '0x00124b0022e93d4e' failed: 'Error: Write 0x00124b0022e93d4e/1 msRelativeHumidity({"545":{"value":83,"type":33}}, {"sendWhen":"immediate","timeout":10000,"disableResponse":false,"disableRecovery":false,"disableDefaultResponse":true,"direction":0,"srcEndpoint":null,"reservedBits":0,"manufacturerCode":null,"transactionSequenceNumber":null,"writeUndiv":false}) failed (Status 'UNSUPPORTED_ATTRIBUTE')'

The attributes display as null in z2m state view. Battery did work but doesn’t now after re joining the network.

{ "humidity": 71.44, "linkquality": 224, "report_delay": 1, "temperature": 24.31, "battery": null, "enable_humidity": null, "enable_temperature": null, "high_humidity": null, "high_temperature": null, "low_humidity": null, "low_temperature": null }

Any ideas?

[zibous]

Same Problem here:

{
    "battery": 100,
    "humidity": 71.88,
    "last_seen": "2023-09-09T10:26:53+02:00",
    "linkquality": 255,
    "report_delay": 5,
    "temperature": 23.19,
    "voltage": 3000,
    "device": {
        "applicationVersion": 5,
        "dateCode": "20201026",
        "friendlyName": "weather-SNZB02-02",
        "hardwareVersion": 1,
        "ieeeAddr": "0x00124b00226b5a3a",
        "manufacturerID": 0,
        "manufacturerName": "efektalab.com",
        "model": "SNZB-02_EFEKTA",
        "networkAddress": 43279,
        "powerSource": "Battery",
        "softwareBuildID": "08/09/2022 19:42",
        "stackVersion": 4,
        "type": "EndDevice",
        "zclVersion": 1
    },
    "enable_humidity": null,
    "enable_temperature": null,
    "high_humidity": null,
    "high_temperature": null,
    "low_humidity": null,
    "low_temperature": null
}

Error 2023-09-09 10:54:08Publish 'set' 'enable_temperature' to 'weather-SNZB02-02' failed: 'Error: Write 0x00124b00226b5a3a/1 msTemperatureMeasurement({"544":{"value":1,"type":16}}, {"sendWhen":"immediate","timeout":10000,"disableResponse":false,"disableRecovery":false,"disableDefaultResponse":true,"direction":0,"srcEndpoint":null,"reservedBits":0,"manufacturerCode":null,"transactionSequenceNumber":null,"writeUndiv":false}) failed (no response received (62))'