skl111

Con you comment on this q&a @FormerLurker https://github.com/FormerLurker/ArcWelderPlugin/discussions/215

Sure, I am using and SKR Mini E3 2.0 on Ender 3's & 5's with linear rails on the x & y axis's v-rollers for x until i get those...

It does, and do you have a link or info on these and how to use P in cura? //#define ARC_SEGMENTS_PER_SEC 50 // Use the feedrate to choose the segment...

I got this working by adding the following dnf install epel-release dnf install python39 python39-devel git gcc-c++ policycoreutils-python-utils and modifying the deploy script to not install python3 as that reverts...

Yes it does. m569 near the bottom ``` Send: M503 Recv: echo:; Linear Units: Recv: echo: G21 ; (mm) Recv: echo:; Temperature Units: Recv: echo: M149 C ; Units in...

Yep, your correct in that when its SpreadCycle it doesn't show. They correspond that with the S0 having it set to off and the S1 having it set to on...

 I am experiencing this same issue setting up a 3d Printer farm where I use 1 UPS per printer. I did some skulking around and I discovered...

@jimklimov thanks for the reply, lsusb uses libusb so that pr probably is accurate. I will have to take some time to compile a build for rocky 8 and debian...

I finally got around to getting this working on debian 11 and maybe I am missing something, but this does not solve the issue as it references the device #...

And update to this based on testing. `allow_duplicates` looks like it obeys the bus & dev rule, as I had the dev's at ports 6 & 7 and then when...