silverhawk1983

that could open some options for both Lights, Fan Control, Valves, VFD and some more hope we can test some soon with those chips

> It's feasible and wouldn't be too hard to develop. It would act like any other Value Output that allows you to set a value (between 0 and 10) and...

i got 2 2ch 15bit 0-10v modules today in the mail did we have by any chance some code to test with them

will try it hope it will work with the 15bit to

So i try use the new module with the 15bit thats not working but throws no error so then i did a modifiy of the module code for the GP8413...

could that be used [https://github.com/DFRobot/DFRobot_GP8XXX/blob/master/python/raspberryPi/README.md](https://github.com/DFRobot/DFRobot_GP8XXX/blob/master/python/raspberryPi/README.md)

sure your right i have only the 15bit Version but the Control is the same for all of those only dif is the internal command for the value in Case...

> I don't think your library is a good solution. For one, it uses RPi.GPIO, which A) is not supported in Pi 5s, and B) is a terrible way to...

> And does the code you linked to work? no! > So i try use the new module with the 15bit thats not working but throws no error > >...

Tested Your Code in my dev system on Raspi 5 but like i sad no error and no output but like i said the 8413 not the 8403  ...