set_

Hello @tomek242 , Also, the pins on the Motor Bridge Cape are confusing for the servo header. If you are using Servo1 in your source, try to use the exterior...

@tomek242 , Hello sir...did you figure it out yet? I am checking in to see if you got things working. Seth

Hello @tomek242 , Okay...I will test again. I have the hardware here. I will let you know exactly my set up, source, and board used. Please be patient. Seth P.S....

Okay and okay, @tomek242 : Here: ``` # * MotorBridge.py # * This is a library for BBG/BBB motor bridge cape # * Copyright (c) 2015 seeed technology inc. #...

@tomek242 , Oh and... If you have time, please use a venv for this specific instance if you are having issues. So, `sudo apt install python3-venv` and then type this...

Hello Sir, I am a novice w/ all this info. but if you need support, I will take time out to look over things and test stuff. Seth P.S. If...

@pdp7 , Hello Sir...I have been reading and trying to catch up to what you may already know about these instances listed above. ... https://github.com/torvalds/linux/blob/master/Documentation/driver-api/gpio/drivers-on-gpio.rst. This is what I found...

Hello, I still have the /sys/class/gpio (legacy) system and the new character device system for gpio at /dev. Seth P.S. I will work on it. Be back later in the...

Okay and Hello, I found the userspaceio GitHub.com page. This is good motion in action. I found the fellow that did a presentation on Linux Embedded Conference, too. He has...

@pdp7 Hello Again Sir...Look here: https://www.hackster.io/silver2row/the-new-character-device-idea-0968d6. I made a "funny" set up of making a LED blink on and after the return button has been pressed, the LED turns off...