HansPB
HansPB
> > > Hi Michael, > > OpenCNCPilot intentionally doesn't probe Z=0 at the start of a run so you can set the zero position at an arbitrary point. (XY...
> > > I did some testing and it seems that this is an issue with grbl, not OpenCNCPilot. > The issue arises when you nest comments (use brackets inside...
> > > Hi Hanspeter, > > you're absolutely right, I'll try to fix this soon! > > Cheers, > Martin Thanks Boss. OCP seem not to send 0x18, [ctrl-x]...