shmoun

I can confirm that ``` scratch_link -r 2 -s 3 ``` makes the difference in connecting successfully to the LEGO BOOST hub. Thank you for your work!

Are you getting your IP from a DHCP server or setting it manually? You can check if your gateway is set correctly. If you're using hostnames for pinging you could...

It would be interesting to get a packet capture on the gateway. Comparing successful pings and replies hosts on the other subnet to unsuccessful pings. What is going on? Does...

I've found exactly the same connector inside a Stellar-XL3N@ ``` | O | O | VCC | GND | | O | O | TMS | NRST | | O...

I have some of those Stellar-MN@ E31HA and made it work to use the full screen. I forked this repo and have a stellarmn@ branch: [stellarmn@](https://github.com/sengelsman/ATC_TLSR_Paper/tree/stellarmn%40) Please report your findings.

I'm attaching the pre-built binary with Stellar-MN@ E31HA support. Built from cleanly checked out [stellarmn@](https://github.com/sengelsman/ATC_TLSR_Paper/tree/stellarmn%40) [ATC_Paper.bin.gz](https://github.com/atc1441/ATC_TLSR_Paper/files/10935492/ATC_Paper.bin.gz)

It was some time ago that i flashed my STN-E31HA displays through the wire, so just to be sure I took a fresh one and repeated from memory. - GND...

Python 3.9.2 venv using pypi packages: ``` errbot 6.1.9 mattermostdriver 7.3.2 ``` We've noticed this issue today when our mattermost host crashed. Our bot kept running but the websocket was...

Found this issue in the mattermostdriver [repo](https://github.com/Vaelor/python-mattermost-driver/issues/119) Now running with the patched `websocket.py` to see if the websocket survives a reboot of the mattermost host. This custom `websocket.py` depends on...

Arduino-IDE users will bump into the following:   This pull request should fix it. Thanks!