Shirish Jadav

Max CPU freq you are using in this project.

6

We have developed some boards and are trying to drive the screen with this drivers.. when trying to do sub clear we used to get barcode kind of view on...

GPIO misunderstanding

1

In file gdisp_lib_board_example.h According to sch. in line #74 you have used GPIOA but your Schematic shows GPIOC connected to EINK_VDD and you have not defined GPIOA_EINK_VDD but instead you...

unable to load firmware to stm32f103C

2

I have setup stm32 board properly with boot0 set to 1 and boot1 set to 0 and connecting RX and TX to arduino uno board removing mcu from it. I...

I am trying to subscribe to topic but when it fails after some time I retry and if it fails I stop mqtt to disconnect from broker but it does...

not able to connect to hive mqtt

3

``` .[0;32mI (3345) event: ip: 192.168.1.129, mask: 255.255.255.0, gw: 192.168.1.1.[0m [MQTT INFO] Starting mqtt task [MQTT INFO] Resolve dns for domain: broker.hivemq.com [MQTT INFO] Connecting to server 35.156.1.237:1883,23303 [MQTT INFO]...

What does t MQTT_MSG_TYPE_PINGRESP mean?

9

I am getting following thing I don't exaclty know that mqtt broker is working fine or not. but I want to understand the error .. ![screen shot 2017-06-30 at 12...

Not able to Locate EEPROM.h file

6

C:\Program Files (x86)\Arduino\libraries\EEPROMex/EEPROMex.h:23:20: fatal error: EEPROM.h: No such file or directory #include ^ compilation terminated. Error compiling. If I include EEPROM in main Code I get this problem.. I am...

I tried that shader in shaderfrog [here]( http://shaderfrog.com/view/1514 ). Some thing looks wired about it. I also tried to use it in processing. here is what it looks like ....

Hi if I want to make 2 strips with different mega boards and have two lumiverse(lumiverse 1 & lumiverse 2) how do I set lumiverse in code for other strip?

no such file or directory: '../../../cinder_master/lib/libcinder_d.a'

1

I have downloaded and renamed cinder folder to cinder_master and this folder is just next to cinder_master I am getting this error. no such file or directory: '../../../cinder_master/lib/libcinder_d.a' I am...