shinra-electric

Update: 1st run - Open (small window). Set resolution to 2560x1440, clicked apply and quit 2nd run - Window opened at roughly 1600x1200 (4:3 ratio, black bars at the sides)....

Yes, I just made a new build and it exhibits the same behaviour.

Just to clarify, for Dhewm3 I normally use the MSP build. Earlier today I built it myself just in case you recently made any changes to the code that might...

`So you set the mode to 2560x1440 in the menu, right?` - Yes `And then afterwards (before any restart, in the first log) r_mode is 16 (which is 1920x1200) -...

Just to add, after I set to `r_mode 23`, I noticed that the menu says `r_custom` 

Yes, I have an Intel Mac I can test on, though I probably won't do it tonight.

I tested the MSP version again with a 2015 MacBook Air, also on Monterey (12.4) and it exhibits the same behaviour. While I was at it, I tested both on...

Here you go. Tested on Monterey 12.4 with an M1. 1st run: loaded with whatever settings I had previously, screen size was 640x480. Used the menu to change to 1440p...

This worked for me too, although the dylibs were not added to the app bundles. After manually adding it worked fine.

Sorry, I just did `make` rather than `make install`. But I just tried it now, and the install part failed: `CMake Error at code/cmake_install.cmake:49 (file): file INSTALL cannot make directory...