shenzhenadam
I don't have config.yaml or io_test.nc on my ESP32: Grbl 3.7 [FluidNC v3.7.17 (wifi) '$' for help] $localfs/list [FILE: 6x_default.yaml|SIZE:5437] [FILE: favicon.ico|SIZE:1150] [FILE: index.html.gz|SIZE:117066] [FILE: taig_probe.flnc|SIZE:1649] [/littlefs/ Free:52.00 KB Used:140.00...
Thanks .. Yes I found those already .. I'm doing that now .. please wait a sec ..
Video of IO test here: (if you would like clearer video, please let me know) https://imgur.com/a/T8gJ21t $localfs/run=io_test.nc ok [MSG:INFO: GCode Comment...IO Test Begin] [MSG:INFO: Enabling all motors] [MSG:INFO: Disabling all...
Thanks for that .. Yes I could try moving the motors to 5 & 6 as a temporary fix ... but later I will want to use those outputs for...
Hello, I have tested the 6X controller after moving the outs from 3 & 4 to 5 & 6. Everything seems to work fine for now. Please below link for...
Hello .. Sorry for the delay .. The FluidNC 6X controller with 1,2,5&6 (XYYZ) outputs to stepper has worked fine during a long 9 hour V-Carve - I will post...
Here's a video clip - you can watch from 3:11 https://youtu.be/5iAweBlNY3M?si=lI8tQ7oZL3Ech0c6&t=191
Hello, I have tried & tested several new jobs using the same axis with 1,2,5&6 (XYYZ) - seems to be stable for now ... However I will be needing all...