Michel Pastor
Michel Pastor
Cool idea
It could be done for NMEA I guess but most people use UBlox modules which are using a binary protocol. IMO this wouldn't be very useful.
It is not as easy because more than one protocol can be enabled on a port (port sharing) but I guess once serial RX is enabled on a port nothing...
> I have FlySky telemetry on the same port with the receiver Ok then it is not possible. > And I do not know how it is with the FPort...
Ok but then it is not technically the same UART
For now you can do it from the CLI. You can find the ids here: https://github.com/iNavFlight/inav/blob/master/src/main/io/osd.h#L38 For example if you want to have VBAT (id 1) at the same position...
This feature request belongs in the configurator project not the firmware. Why would this be useful ? Are you looking at the configurator window while flying ? Also you can...
I think the only reason is that the target has been merged after the release
Yes with accurate wind speed and direction information assuming the idle power, cruise power and cruise speed are set correctly it should be possible to have a reliable RTH based...
Sure it should be possible to auto-learn the cruise parameters fairly easily assuming air speed estimation is reliable