shaojielinux

目前发现openfalcon graph 显示的图是点没有出图，详细描述如下：

2

push 数据 step': 1800设置为1800，脚本计划任务执行，每30分钟执行一次，但是最终没有图 只看到有几个点，请问我还需要做什么配置吗？

hbs前面加了一个nginx 做反向代理。然后把agentd里面hbs指向nginx地址，发现报错2018/08/16 14:22:18 reporter.go:34: call Agent.ReportStatus fail: invalid character 'H' looking for beginning of value Request: {CN_BJ_open-falcon1 10.192.27.11 5.1.2 plugin not enabled} Response: {0}

11

我把地址改为hbs地址就可以，不知道这是什么问题 2018/08/16 14:22:18 reporter.go:34: call Agent.ReportStatus fail: invalid character 'H' looking for beginning of value Request: {CN_BJ_open-falcon1 10.192.27.11 5.1.2 plugin not enabled} Response: {0}

I have multiple elasalert, elasalert kibana plugin Does the serverhost support writing multiple addresses

1

I have multiple elasalert, elasalert kibana plugin Does the serverhost support writing multiple addresses

是否可以添加手动确认告警actived

8

是否可以添加手动确认告警actived， 比如告警连续在发生然后我们可以手动点击这个告警然后进行确认，一段时间内此告警就不会发生了。

After the file is uploaded to s3, the content is wrong, is it an encoding problem?

2

After the file is uploaded to s3, the content is wrong, is it an encoding problem? input { kafka { bootstrap_servers => "10.88.14.172:9092,10.88.6.9:9092,10.88.10.166:9092" #topics => ["k8s"] #group_id => "k8s1" topics...

level=error msg="Failed to login user: ldap: initial bind for user \"[email protected],dc=okta,dc=com\" failed: unable to read LDAP response packet: unexpected EOF"

How to configure the external mongodb user password?

1

How to configure the external mongodb user password?