Scott Frappier

This seems like such a basic feature. Almost every development platform supports the ability to make visual controls non-editable. Why is this such a problem where it's so basic of...

OK - PEBKAC error...turns out LCD and HDMI were loaded in the kernel configuration (not as modules). I still have the issue when the mali module loads - the entire...

I was hoping that would be the culprit - I re-ordered the module load based upon your comment, but it still locks up. What I have found is that it...

Appreciated - I'll try that as well to see if there's any major differences - I just recompiled the kernel with fb as a module so that I can use...

No juice - I'm going to try on eof your configs over the weekend and I'll let you know what happens.

romanrm: I just compiled the kernel using your config - same exact issue. I'm at 3.0.57 instead of 52 - do you think this would make any difference? The system...

amery - I'll try tonight and let you know...

Just to confirm - SHA1 = 89a5378dd5ef60c1d3fba0aa96cc543dfe65266c - correct?

amery - tried commit 89a5378dd5ef60c1d3fba0aa96cc543dfe65266c - booted first off with mali and mali_drm commented out in the strict order that roman mentioned. Booted successfully - dmesg and syslog populated correctly....

romanrm: You are correct - I would put it in /etc/modules. I followed your instructions and still receive the same issue (using 3.0.57-r1). Ubuntu uses lightdm but I did what...