AqualinkD
AqualinkD copied to clipboard
sfeakes
Daemon to control Jandy Aqualink RS pool equipment from any home automation hub (Alexa, Homekit & Siri, Home Assistant, smartthings, domoticz etc) or web browser.
After upgrading to 2.2.1, everything seemed to be working correctly, except one weird issue. The light for my water feature gets stuck on. When I turn it off via the...
Allow next thread to run as soon as the previous thread completes.
see https://github.com/ballle98/AqualinkD/issues/21 There are times when the message rate is not predictable especially when there is no active web connection and aqualinkd is trying to go to sleep to allow...
There are several instances where synchronization between the main thread, and the worker threads is done through variables. Polling these variables at different intervals waiting for a state change. A...
Thank you very much for your hard work on the AqualinkD project. I have and 2008ish system with a PDA-P4 chip and remote and just got it working with your...
You can use ha-bridge to control your pool from alexa but for the status to be reported correctly you need to sync the status from aqualinkd to ha-bridge see bwssytems/ha-bridge#348
I've tried to customize my interface by following the instructions here https://github.com/sfeakes/AqualinkD/wiki#aqualinkd-web-ui-configuration, but I do not see any changes in the UI. I've made changes in the /var/www/aqualink directory as...
Hey buddy, firstly let me say thank you for your efforts here. This is super useful to have this written. I had it working with a Pi 4 on a...
Hello, Finally got this up and running. Everything is working except turning the heater on. When I use the interface it shows it turns on, On the jandy rs it...
