Seven

1. Check that your bios settings are correct. 2. Turn on verbose mode by adding `-v` to the `boot-args` key in the config.plist file. 3. Post the error message from...

Closing this as you haven't provided any details. Hopefully you figured something out.

That's great. Thanks so much for your help. Let me know if there's anything else I can do. For reference, the two devices I use Stats on are SMBIOS MacPro7,1...

Ok. I tried the custom build. I noted the following from running `smcread -s` ``` [D0GT] type [87ps] 38377073 len [ 2] attr [80] -> 3200 [P0GT] type [87ps] 38377073...

Seems the order has changed but the SMC key values are still reversed. `smcread -s` ``` [D0GT] type [87ps] 38377073 len [ 2] attr [80] -> 3200 [DDGT] type [87ps]...

@ArthurJLewis not sure if you've resolved this issue? Other reports online outline the following: >You just have to have SecureBootModel in config.plist set to “Disabled” instead “Default” during installation (assuming...

I know this issue is a little old. So I'm not sure if it's still relevant. The latest EFI and kexts should resolve the Networking issues. Both LAN ports are...

@bennydf123 did you get to the install? Let me know if you're still having issues, otherwise I'll close this. Thanks.

@bennydf123 this could be due a couple of different things: 1. BIOS setting - check to ensure they are set correctly - generally reported around SecureBoot issues - you can...

For wifi you may need to set `DisableIoMapper` to `True` as discovered here #67 Let me know if that solves the wifi issue.