serkanc

There is an error when compiling error: 'SdFatSdio' does not name a type SdFatSdio sd; I'm using Sdfat library from Bill Greiman v1.1.0

I have enabled USE_SDIO in configuration and added #define ENABLE_SDIO_CLASS 1, but still same error.

I'm using Arduino IDE. I tried example for TeensySDIO example, but still same error. I downloaded Sdfat Beta, same error.. I will tell this issue. I will use your sdfat...

https://github.com/victorpv/SdFat I used this Sdfat... The same error...

https://github.com/stevstrong/SdFat Still same error examples STM32F4SdioDemo, only changing SdioF4.h to SdioF1.h

C:\Users\serka\Documents\Arduino\libraries... I can use sdfat with normal SPI examples. But it give an error when I want to compile sdio examples

I'm using Generic stm32103R as board. variant Stm32103RE

``` SdSpiSTM32.cpp: In member function 'uint8_t SdSpiAltDriver::receive(uint8_t*, size_t)': error: invalid conversion from 'uint8_t {aka unsigned char}' to 'const void*' [-fpermissive] m_spi->dmaTransfer((uint8_t)0xFF, buf, n); ``` Example in Sdfat by stevstrong STM32test.......

Using library SPI at version 1.0 in folder: C:\Users\serka\AppData\Local\Arduino15\packages\stm32duino\hardware\STM32F1\2019.9.24\libraries\SP Using library SdFat at version 1.0.14 in folder: C:\Users\serka\Documents\Arduino\libraries\SdFat

I passed "error: 'SdFatSdio' does not name a type" this writing #define ENABLE_SDIO_CLASS 1 under `#if defined(__STM32F1__) in SdFatConfig.h `but the error is ``` Documents\Arduino\libraries\SdFat\src\SpiDriver\SdSpiSTM32.cpp:74:43: error: invalid conversion from 'uint8_t...