Sensei comments

Results 87 comments of


                                            Sensei

GPS HGLRC M100 5883 is taking a long time to capture and fix satellites on inav 7.1

If you haven't _already_ made any changes via U-Center, please hold off for now. Also I forgot to ask - which GPS unit do you have? You're in a thread...

Speedybee 405 only arms when usb connector is connected to the pc

Do you have an OSD? If so, put "system messages" on the OSD and you'll probably get some useful information.

Why doesn't vtx catch a larger range of video signal? (pit)

A VTX that only goes 2 meters means the channels don't match, or one of the antennas is broken / disconnected*, unless you're in pit mode. Check the instructions on...

inav7.1.1 with optflow senser（micoair MTF-01） can't hold altitude on althold mode

What do you have max_surface_altitude set to?

inav7.1.1 with optflow senser（micoair MTF-01） can't hold altitude on althold mode

Okay so you have it set to ignore the rangefinder above 2 meters. If you want to fly 3-4 meters above the ground, you may want to allow the rangefinder...

Allow LED pin to be reassigned as MOTOR or SERVO

> It would be great if the LED pad could be assigned to PINIO too. There's a another recent PR which allows the LED pin to be user-controlled PWM from...

FLYWOO F745 motor mapping incorrect in iNav version 7

To get the old mapping, set timer 1 and timer 3 to be motors, but not timer 8. The new mapping has S2 on what used to be S5.